AM50D
DC amplifier
Product Outline
High-accuracy DC amplifier with high-pass and low-pass filter.
- 7-segment LED display with 8mm character height
- High-accuracy DC amplifier with high-pass and low-pass filter
- High gain (max. gain: 10000 times) at DC to 20kHz band
- Equipped with easy-to-use strain gage simulator function for calibration
- Zero drift: within ±0.3μV/℃
- Auto zero function
Specifications
| Input resistance range | 60Ω to 2kΩ |
|---|---|
| Excitation voltage | DC2.5, 5, 10, 15V±0.3% Output current: within 50mA |
| Zero adjustment range | ±1.5mV/V 10 turn potentiometer dial knob |
| Gain adjustment range | Coarse adjustment: 0, 1/50, 1/20, 1/10, 1/5, 1/2,1/1 Error±0.2% Fine adjustment: 1 to 1/6 of each range variable |
| Input voltage range | 0 to ±100mV |
| Input resistance | 10MΩ or more (balanced differential direct-connect type) |
| Voltage amplification | Max. 10000 times |
| Zero drift (at gain max.) | Within ±0.3μV/℃ RTI (after a lapse of 30 min. after power ON) |
| Gain drift | Within 0.01%/℃ (after a lapse of 30 min. after power ON) |
| Noise (at gain max.) | Within 20μVp-p RTI (full band) Within 6μVp-p RTI (1kHz band) Within 0.8μVp-p RTI (10Hz band) |
| Non-linearity | Within ±0.01%/FS |
| Output signal | Voltage output: 0 to ±10V ±5mA Output resistance: 0.2Ω (BNC connector output (Two lines)) Voltage output: 0 to ±10V ±30mA Output resistance: 300Ω (External I/O connector) |
| Response characteristic | DC to Approx. 20kHz/ -3dB |
| High-pass filter | 0.5Hz(-3dB), ±15%, -6dB/oct. (AC mode) |
| Low-pass filter | Bessel type (-12dB/oct.) 1, 10, 30, 100, 300, 1kHz (-3dB) ±15% and PASS |
| Calibration value | Strain calibration: ±1 to 9999×10-6 strain (superimposed on input signal) Setting method: 4-digits digital switch Accuracy: ±0.2%±0.5×10-6 strain |
| External control | Auto zero function; Auto zero range: ±1V Resolution: 12bit (±1/2000) Auto zero command; ON and OFF, panel face switch and external signal (negative pulse with a pulse width of 100ms or more) CAL command; CAL+ and CAL-, panel face switch and external signal |
| Voltage monitor | Display: Character height 8mm numerical display, 7 segment red LED Dispaly value: −19999 to 19999, sign: minus sign on most significant digit Unit: V fixed Minimum scale value: 1, 2, 5, 10 (Rounding off) |
| Operating conditions | ･ Operation temperature range: 0 to +40℃ ･ Storage temperature range: −30 to +80℃ ･ Humidity: 85%RH or less (non-condensing) |
| Power supply voltage | AC100V±10%, 50/60Hz |
| Power consumption | Approx. 10VA |
| External dimensions | 49.5(W)×138(H)×310(D) mm (not including protrusions) |
| Weight | Approx. 1.6kg |
| Attachments | ･ AC input cord ×1 ･ Spare fuse (0.5A) ×1 ･ CA8 (BNC-BNC-alligator clip cable 1.5m) ×1 ･ Operation manual ×1 |
Optional accessories
| Model | Description |
| CA3Y31 | Cable with PRC connector at one end (6 wire) 3m |
|---|---|
| CA451 | Cable with PRC connector at both end (6 wire) 5m |
| CA7 | Coaxial cable with BNC 1.5m |
| CA8 | BNC-alligator clip cable 1.5m |
Download
|
Product catalogue(PDF)
|
AM50D Product catalogue Dowmload | |
|---|---|---|
|
Operation manual(PDF)
|
||
|
External dimention
|
DXF
（ZIP） |
|
|
PDF
|
||
|
Support tools
|
||
|
Software
|
||
- User registration is required to download operation manuals, external dimentions, support tools and software .
- Acrobat Reader software from Adobe Systems is required to view PDF files.