Torque meter
Our torque sensors are used to detect torque applied to rotating shafts, mainly used for testing motors, engines, and other rotary components. Those are available in wide capacity ranges from 0.05Nm to 10000Nm, and we have drip-proof type as well. We also offer various instruments for monitoring torques, including (but not limited to) a USB interface for PC connection, digital indicators to monitor torque, rotation speed, and power simultaneously, and a power and energy monitor for motor test benches.
Slip-ring-less rotating torque meter
UTMⅢ
- 5 times more responsive than UTMⅡ, detect torque and output faster.
- Slimmer body & noise resistance digital output added.
- New model UTMⅢ! High functionality with 1/10000 resolution & 500% safe overload!
Rotary encoder option for UTMⅢ series
UTMⅢ(R)
- 5 times more responsive than UTM II, detect torque and output faster.
- Slimmer body & noise resistance digital output added.
- New model UTM III! High functionality with 1/10000 resolution & 500% safe overload!
- Optical encoder 3600 C/T Suitable for measurement of torque against angular variation
- Max. rotation speed is 5000rpm
DIN rail mount torque converter with CC-Link interface
TC80-CCL
- TC80-CCL is a compact torque converter.
- Compatible with rotary encoder option (UTMⅡ(R)/ UTMⅢ(R)) too!
- UTM III / UTF digital output can be read, and make noise resistance tester.
- Torque data (hold value) is stored up to 100, and data can be read.
Slip-ring-less rotating torque meter
UTM II
- Slip-ring-less = maintenance-free. rotating torque meter.
- Analogue bandwidth 1kHz with high speed sampling rate of 6kHz.
- Measurement range 0.05Nm, 0.1Nm, 0.2Nm, 0.5Nm, 1Nm, 2Nm, 5Nm, 10Nm, 20Nm, 50Nm, 100Nm, 200Nm, 500Nm, 1000Nm, 2000Nm, 5000Nm, 10000Nm Noise immunity has been greatly improved.
Rotating torque meter with square drive
UTM II(W)/UTM II(WR)
- Ideal torque meter for torque monitoring of screwdriving machines and power tools such as nutrunners.
- Prevent damage due to insufficient or excessive tightening.
- Torque monitoring : UTM II（W）, Torque+Angle monitoring : UTM II（WR）.
- Capacity: 100Nm or 500Nm.
Drip & rust proof rotating torque meter
UTMV
- With the protection against rain and seawater, it can be used outside for wind and water turbine and so on.
- Capacity type: 0.1,0.5,1, 5, 10, 50, 100, 500, 1000, and 5000Nm type will be available in near future).
- Analogue bandwidth 1kHz with high speed sampling rate of 6kHz.
- Safe overload: 500%.
UTM II/UTMV coupling
UCM/UCS
- Couplings for UTM II/UTMV.
- Connecting to external shafts accurately.
- Preventing rotational resonance, and improving accuracy of torque measurement (rubber type).
Torque monitor for UTM II/UTMV
TM700
- Torque monitor for UTMⅡ/UTMV.
- Display the curves of torque, rotation speed, and power.
- Operation power can be supplied to the UTM II/UTMV (and to the optional rotary encoder as well).
- Enable the cogging torque measurement with UTMII/UTMV.
- Easy connection to UTMⅡ/UTMV with one cable.
Torque monitor for UTM II/UTMV
TM500
- Torque monitor for UTM II/UTMV.
- Suitable for low-speed rotation and direct-acting applications.
- Data are recorded on SD cards.
- Operation power source can be supplied to the UTMⅡ/UTMV. (also to an optional rotary encoder).
- Easy connection to UTM II/UTMV with one cable.
Portable torque monitor for UTMII/UTMV
TM400
- Torque monitor for UTM II/UTMV.
- With the built-in battery, it can be operated even without power source.
- Ideal for use with UTM II (square shaft) series with the high-speed sampling at 20kS/s.
- Operation power can be supplied to the UTM II/UTMV(and also to an optional rotary encoder).
- Easy connection to UTM II/UTMV with one cable.
Torque monitor for UTM II/UTMV
TM301
- Torque monitor specialized for UTM II/UTMV.
- Torque, rotation speed and power are displayed simultaneously.
- Hold function (Sample, Peak, Valley, P-P, Average).
- Upper/lower comparators function (（ALM HI, HI, OK, LO, ALM LO).
- Data storage function.
- Easy connection to UTMⅡ/UTMV with one cable
USB interface device for UTM II/UTMV
TM201
- Variations of torque, rpm, and power can be monitored and saved on PC.
- Maximum, minimum, and average value can be displayed.
- Measurement (numeric) data is automatically saved in CSV format.
- The unit supplies operation power to UTM II/UTMV.
- Two cables are attached: one for UTM II/UTMVand the other for PC.