Contact Us


Torque monitor for UTMⅡ/UTMV


Product outline

UTMII/UTMV series can be easily connected to TM700 with the supplied cable. With the high-speed sampling rate of 20kS/s, TM700 can support the high response time of UTMII/UTMV (1kHz). Fluctuation of torque, rotation speed, and power over a short period of time can be displayed.


  • Torque monitor for UTMⅡ/UTMV.
  • Display the curves of torque, rotation speed, and power.
  • Enable the cogging torque measurement with UTMII/UTMV.
  • Easy connection to UTMⅡ/UTMV with one cable.
  • Operation power can be supplied to the UTMⅡ/UTMV (and to the optional rotary encoder as well).
  • Upper/lower limits & hold function.
  • Ideal for applications such as nut runners, motor test benches, engine test bench, mixer, wind power generation, etc….

Sample display


External dimension



Torque input (voltage input)
Signal input range -5 to +5V Input impedance:1MΩ or more
Accuracy Non-linearity:within 0.02%FS±1digit
Zero drift: within 0.2mV/℃ RTI
Gain drift : within 0.01%/℃
Analog filter Low pass filter (-6dB/oct.)
Select from 10, 30, 100, 300, 1k, 3k, 10k, 30kHz
A/D converter ・ Rate :20000times/sec
・ Resolution:24bit (binary)  Approx. 1/30000 against 5V
Monitor output Output level :input voltage cuff (for test point)
Input for high-speed rotation (open-collector pulse)
: for standard UTMII/UTMV.
Maximum input frequency In accordance with the output frequency of the UTMⅡ/UTMV series
Minimum input frequency Select from 15, 10, 5, 3, or 2 rpm (when pulse rate is 4 ppr)
60, 40, 20, 12, 8 rpm (when pulse rate is 1 ppr)
Minimum detection pulse width 50μs
Circuit configuration No-voltage contact input (minus common)

Open collector connectable (Ic=Approx. 10mA)
Input for low-speed rotation (open-collector pulse)
: for UTMII with rotary encoder option
Maximum input frequency Approx. 1000rpm
Minimum input frequency 0.1rpm
Minimum detection pulse width 5μs
Circuit configuration No-voltage contact input (minus common)
Open collector connectable (Ic=Approx. 10mA)
Display section
Display unit 3.5 inch TFT color LCD
External I/O signal
External output (8) ex) high and low limit outputs
External input (10) ex) hold control input, digital zero input(DZ)
Standard SIF:2-wire serial interface
USB:USB interface
Option D3V:D/A converter voltage output (3ch)
General specifications
Power supply DC24V (±15%)
Power consumption 18W max
Operating conditions Operation temperature:-10 to +40℃, storage temperature: -40 to +80℃
humidity:85%RH or below (non-condensing)
Dimension 96(W)× 96(H)× 138(D)mm (excluding projections)
Weight Approx. 1.0kg
CE marking certification EMC directives EN61326-1
  Operation manual・・・・・・1
External input/output connector・・・・・・1
Cable for connecting UTMⅡ/UTMV (2m)・・・・・1
Operating tool (with D/A converter(3ch) option)・・・・・・1

Optional accessories

Model Description
DTC2 Case for TM700 (with AC power supply)
CA372-I/O Cable with FCN connector at one-end 3m
CA81-USB miniUSB-computer USB cable 1.8m
CATM21-M 2m cable for connecting UTMⅡ/UTMV
CATM51-M 5m cable for connecting UTMⅡ/UTMV
CATM(R)21 2m cable for UTMⅡwith rotary encoder connection (non-connector at one end)
CATM(R)21-M 2m cable for connecting UTMⅡrotary encoder
CATM(R)51-M 5m cable for connecting UTMⅡrotary encoder
CN50 FCN series I/O connector (with cover)
CN55 FCN series I/O connector (with diagonal cover)
CN73 D/A converter(3ch) connector
CN90 Waterproof plastic connector for UTMⅡ/UTMV
CN91 Waterproof plastic connector for UTMⅡrotary encoder
GMP96x96 Rubber seal
TSU03 DC lighting surge unit


Product catalogue(PDF)
TM700 Product catalogue Download
Operation manual(PDF)
External dimention
Support tools
  • User registration is required to download operation manuals, External dimentions, support tools and software.
  • Acrobat Reader software from Adobe Systems is required to view PDF files.