Contact Us

UTMV

Drip & rust proof rotating torque meter

Product outline

Drip & rust proof rotating torque meter, UTMV, is now available. With the protection equivalent to IP65, it can be used in an environment with possible exposure to rainwater, seawater, minute dust particle, and oil-mist.

  • Degree of protection: equivalent to IP65
  • Made of rust-resistant stainless steel
  • Labyrinth structure type is recommended for a rainwater/seawater environment
    Fluororubber rotating seal type is recommended for a minute dust/oil-mist environment(option)
  • Capacity type: 0.1, 0.5, 1, 5, 10, 50, 100, 500, 1000, and 5000Nm

★☆Please contact us now for product trial or demonstration!☆★

it can be used in an environment with possible exposure to rainwater, seawater, minute dust particle, and oil-mist.

utmv-img

Application examples

utmv-img

Labyrinth seal type & Fluoro rubber rotating seal type(Option:(S))

The standard type comes with labyrinth seals suitable for use in an environment with possible exposure to rainwater or seawater.

Fluororubber rotating seal type is recommended for uses in an environment where minute powder or oil-mist exists.

Please note that a rotating seal has a limited lifetime.


Seal type Labyrinth seal Fluoro rubber rotating seal
Drip proof Yes Yes
In minute powder/oil-mist environment. Not suitable Yes
Friction torque Very low Max. 10% (0.1Nm type)
Max. speed 10000rpm (0.1Nm type) 2120rpm (0.1Nm type)
Maintenance Unnecessary Necessary
utmv-img

Specifications

The standard type comes with labyrinth seal, and fluororubber rotating seal type “(S)” is available as an option.


UTMV (0.1Nm to 10Nm)
model UTMV
-0.1Nm
UTMV
-0.5Nm
UTMV
-1Nm
UTMV
-5Nm
UTMV
-10Nm
Measurement range ±0.1Nm ±0.5Nm ±1Nm ±5Nm ±10Nm
Seal type standard (S) standard (S) standard (S) standard (S) standard (S)
Power supply DC24V ±15% 
Consumption current 100 mA or less
Output range ±5V DC Load resistance must be more than 2kΩ
Responsivity 1kHz
Rotation signal 4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA
Safe overload 500%FS
Non-linearity 0.03%FS(Typ)
Hysteresis 0.03%FS(Typ)
Repeatability 0.03%FS(Typ)
Operation temp. range -10 to +50℃
Temp. effect on zero 0.01%FS/℃(Typ)
Temp. effect on span 0.01%FS/℃(Typ)
Max. rotation speed (rpm) 10000 2120 10000 1590 10000 1590 9000 1060 9000 1060
Torsional spring
constant (Nm/rad)
11.13 89.5 172 897 1400
Maximum
torsional angle
8.99
×10-3rad

(0.515°)

5.59
×10-3rad

(0.320°)

5.83
×10-3rad

(0.334°)

5.58
×10-3rad

(0.320°)

7.14
×10-3rad

(0.409°)

Inertia moment (kgm2) 1.15
×
10-6
0.99
×
10-6
2.19
×
10-6
1.90
×
10-6
2.22
×
10-6
1.93
×
10-6
5.60
×
10-6
4.90
×
10-6
5.70
×
10-6
5.00
×
10-6
Main frame
dimension (W×H×D mm)
54×50×40 54×50×40 54×50×40 57×55×40 57×55×40
Length 97mm 107mm 107mm 121mm 121mm
Shaft dia. 5mm 8mm 8mm 12mm 12mm
Approx. Weight 390g 430g 430g 580g 580g
CE marking certification EMC directives EN61326-2-3
UTMV (50Nm to 5000Nm)
Model UTMV
-50Nm
UTMV
-100Nm
UTMV
-500Nm
UTMV
-1000Nm
UTMV
-5000Nm
Measurement range ±50Nm ±100Nm ±500Nm ±1000Nm ±5000Nm
Seal type standard (S) standard (S) standard (S) standard (S) standard (S)
Power supply DC24V ±15% 
Consumption current 150 mA or less 160 mA or less
Output range ±5V DC Load resistance must be more than 2kΩ
Responsivity 1kHz
Rotation signal 4 pulses per 1 rotation
Open collector Max. ratings 30V, 10mA
Safe overload 500%FS
Non-linearity 0.03%FS (Typ)
Hysteresis 0.03%FS (Typ)
Repeatability 0.03%FS (Typ)
Operation temp. range -10 to +50℃
Temp. effect on zero 0.01%FS/℃ (Typ)
Temp. effect on span 0.01%FS/℃ (Typ)
Max. rotation speed (rpm) 5700 680 4800 570 4800 380 4800 270 4000 180
Torsional spring
constant (Nm/rad)
6887 1.64×103 93.6×103 326×103 1418×103
Maximum
torsional angle
7.26
×10-3rad

(0.416°)

6.11
×10-3rad

(0.350°)

5.34
×10-3rad

(0.306°)

3.07
×10-3rad

(0.176°)

3.53
×10-3rad

(0.202°)

Inertia moment (kgm2) 4.21
×
10-5
3.86
×
10-5
9.6
×
10-5
10.9
×
10-5
6.2
×
10-4
6.1
×
10-4
3.56
×
10-3
3.51
×
10-3
2.38
×
10-2
2.34
×
10-2
Main frame
dimension(W×H×D mm)
(W×H×D mm)
70×68×51 67×74×57 67×79×72 86×103×98 97×141×137
Length 207mm 215mm 257mm 326mm 433mm
Shaft dia. 20mm 25mm 40mm 60mm 90mm
Approx. Weight 1.6kg 2.1kg 4.0kg 10.5kg 28.3kg
CE marking certification EMC directives EN61326-2-3

Download

Product catalogue(PDF)
UTMV Product catalogue Download
Operation manual(PDF)






External dimention
DXF
(ZIP)
PDF
Support tools
Software
  • User registration is required to download operation manuals, external dimentions, support tools and software.
  • Acrobat Reader software from Adobe Systems is required to view PDF files.