Contact Us


Loadcell converter


Product outline

LC240 is a low-drift loadcell converter designed for loadcells. With a U300DC preamplifier with a proven track record in stability adopted for the head amplifier, it realizes low drift and low noise features. The bridge excitation power supply can be adjusted to 6 different levels besides the large capacity that allows up to 4 loadcells to be driven in parallel. LC240 is capable of loadcell converter that is standard equipped with the calibration function and current output.


Excitation voltage 10V DC ±0.5%, Output current: within 120mA……Standard specification
(Up to 4 loadcells at 350Ω can be parallel-connectable.)
2.5, 2.9, 4, 5, 6,6V DC ±0.6%
(Switching over via DIP switch)
Output current: within 60mA
Zero adjustment range 0 to approx. 2mV/V
Coarse adjustment: 16-step rotary switch
Fine adjustment: 20 turn trimmer potentiometer
Gain adjustment range 0.45mV/V to 3.0mV/V, 0.225mV/V to 1.5mV/V
(Range can be changed by selecting an internal switch)
Coarse adjustment: 16-step rotary switch
Fine adjustment: 20 turn trimmer potentiometer
Accuracy Non-linearity: within 0.01%/FS
Zero drift: within 0.25μV/°C RTI
Gain drift: within 50ppm/°C
Noise: within 0.2μVp-p RTI (1Hz)
Output signal Voltage output: 0 to ±10V, Load resistance: 2kΩ or more, Output resistance: 0.2Ω or less
Current output: 4 to 20mA, Load resistance: 500Ω or less
Low-pass filter Low-pass filter (-6dB/oct.)……Standard specification
Approx. 1Hz/-3dB
Calibration value 1mV/V ±0.2%.)……Standard specification
Power supply voltage 100V AC ±10%, 50/60Hz
Power consumption Approx. 5VA
Operating conditions Temperature: Working temperature range -10 to +40°C
Humidity: 85% RH or less (non-condensing)
Dimensions 44.6(W)×110(H)×185(D) mm (protruding parts not included)
Weight Approx. 820g
Attachments AC input cord・・・1
Spare fuse (0.5A)・・・1
Crimping terminal・・・11
Operation manual・・・1

* Nonstandard specifications can support the following: (Please specify when ordering.)

・Current output: 2 -10 mA, Load resistance: 1kΩ or less

・Filter: 10, 100, 1kHz , other

・Calibration value: 0.5mV/V


Nonstandard specifications are prepared for LC240. Please specify them when ordering.

Configurable parameter Standard specification Changeable specification
Current output 4 to 20mA 
Load resistance: 500Ω or less
2 to 10mA 
Load resistance: 1kΩ
Filter 1Hz 10Hz, 100Hz, 1kHz, other
Calibration value 1mV/V 0.5mV/V

Optional accessories

POT03 Potentiometer for external zero adjustment


Product catalogue(PDF)
LC240 Product catalogue Dowmload
Operation manual(PDF)
External dimention
Support tools