UCPI
Tension/compression & center-hole type load cell
Product outline
- Capacity: 1k, 2kN, 5kN, 10kN, 20kN, 50kN
- A tapped hole cut in the center, can be used for both tension & compression measurement
- Suitable for assembling into press machine and compression & tension testing machine due to its low-profile body
- A cable with a connector. Convenient for exchange.
Example of use, Wiring diagram
UCPI is capable of measuring axial force between bolt and nut as illustrated below and is ideal for tension measurement of anchor!
Specifications
| Model | UCPI- 1KN |
UCPI- 2KN |
UCPI- 5KN |
UCPI- 10KN |
UCPI- 20KN |
UCPI- 50KN |
|---|---|---|---|---|---|---|
| Rated capacity | 1kN | 2kN | 5kN | 10kN | 20kN | 50kN |
| Rated output | Approx.2mV/V | |||||
| Safe overload | 150%R.C. | |||||
| Zero balance | ±10%R.O. | |||||
| Non-linearity | 0.1%R.O. or less | 0.15%R.O. or less | ||||
| Hysteresis | 0.1%R.O. or less | 0.15%R.O. or less | ||||
| Repeatability | 0.1%R.O. or less | |||||
| Compensated temperature range |
-10 to +60℃ | |||||
| Safe temperature range | -20 to +70℃ | |||||
| Temperature effect on zero | 0.1%R.O./10℃ or less | |||||
| Temperature effect on span | 0.1%R.O./10℃ or less | |||||
| Input resistance | Approx.1000Ω | |||||
| Output resistance | Approx.1000Ω | |||||
| Recommended excitation voltage |
10V | |||||
| Maximum excitation voltage |
15V | |||||
| Insulation resistance | 1000MΩ or more | |||||
| Cable | φ5 6 conductor flexible cable 3m End treatment 7 leads. |
|||||
| Loadcell material | Stainless steel | |||||
| Deflection at rated | 0.05 mm | 0.06mm | 0.04mm | 0.05mm | 0.06mm | |
| Natural frequency | 5kHz | 7kHz | 10kHz | 10kHz | 13kHz | 13kHz |
| Weight | 350g | 410g | 630g | |||
| RoHS directives | 2011/65/EU (EU)2015/863 | |||||
External dimension
Download
|
Product catalogue(PDF)
|
UCPI Product catalogue Download | |
|---|---|---|
|
Operation manual(PDF)
|
||
|
External dimention
|
DXF
（ZIP） |
|
|
PDF
|
||
|
Support tools
|
||
|
Software
|
||